Composite Hose Applications
The Plascorp Composite hose is used for petroleum based products and the transfer of chemicals, acids and alkalis in the tanker, chemical, refinery and other industrial applications. Plascorp has been manufacturing thermoplastic composite hose for over 50 years.
The product is available through an extensive distribution network developed over this period. Our composite hose construction results in a light and flexible hose.
Download brochure 
Hose Assemblies
Due to the often hazardous conveyance used it is recommended that composite hose should only be used with properly fixed fittings. Composite hoses are normally fitted by the wire whipped method or by external crimp. All hoses have a 4 to 1 safety factor.
Testing
All hose assemblies must be pressure tested hydrostatically to one and a half times the maximum recommended working pressure and electrically tested to confirm continuity per AS2683/AS2594/AS1180.
Fittings
A wide range of fittings can be supplied such as Camlocks, BSP fittings, flanges etc.
Composite Hose Handling Guide
| INCORRECT | CORRECT |
Plasticoat composite hoses are made from quality materials. Their inner films and fabrics provide optimum chemical resistance. Protected with the PVC impregnated outer covers, Plasticoat composite hoses provide the strength and versatility for all petrol and chemical applications.
Rope Lagging
All hoses can be supplied with rope lagging. It is necessary to specify at time of ordering. Polypropylene rope is used as lagging. Lagging insulates and protects the hose from abrasion.
Pressure Loss Flow Chart
