Drilling & Bore Screens

Not only does Plascorp manufacture its own PVC pipe, we have the capability to thread and slot the pipe in house to provide added value to our clients.

Plascorp is the only Australian PVC Pipe manufacturer to have in-house Pipe threading and slotting capability to service the Drilling, Environmental Monitoring and Sub Surface Drainage markets.

Fast and responsive supply for all your PVC casing and screening products!

PVC-U BORECASING SOLVENT WELD (SWJ) (AS/NZ 1477)

Borecasing is a specialised PVC pressure pipe offered to the mining industry.
The cased section of any well usually forms a lining or casing for a water bore drilled
vertically into the ground and houses the pump, drawing water from the source aquifer
to the pump and seals the aquifer from contamination from adjacent zones. In this
application, resistance to crushing rather than internal pressure is the key requirement,
so the primary consideration is pipe wall thickness for high stiffness.

NOM size (mm) MEAN OD (mm) MEAN ID (mm) MEAN Wall (mm) MASS Kg/m
100 114.3 104.7 4.8 2.6
125 140.2 128.4 5.9 4
150 160.2 146.8 6.7 5.2
155 168.2 154.2 7 NA
177 177.5
200 225.3 208.5 8.4 9.45
225 250.4 231.8 9.3 11.8
250 280.4 259.4 10.5 15
300 315.5 292.0 11.8 17
350 355.5 329.0 13.3 20
375 400.5 370.8 14.9 27

MEAN ID (mm) MEAN Wall (mm) MASS Kg/m LENGTH/s (m) PACK QTY
101.7 6.3 3.4 6 67
125 7.6 5.2 6 38
142.6 8.8 6.8 6 24
149.2 9.5 NA 6 18
157.9 9.8 8 6 18
203.1 11.1 12.34 6 18
225.8 12.3 15.53 6 8
252.9 13.8 18 6 8
284.5 15.5 24 6 6
320.6 17.5 27 6 6
361.3 19.7 35 6 6

NOM size (mm) MEAN ID (mm) MEAN Wall (mm) MASS Kg/m LENGTH/s (m) PACK QTY
100 96.1 9.1 4.76 6 67
125 118.2 11 7.35 6 38
150 135.2 12.5 9.6 6 24
155 6 18
177 148.7 14.4 11.7 6 18
200 192.9 16.2 17.4 6 18
225 214.4 18.0 22.9 6 8
250 240.1 20.2 25 6 8
300 270.2 22.7 36 6 6
350 304.5 25.5 48 6 6
375 343.1 28.8 50 6 6

THREADING & SLOTTING

Plascorps™ PVC product range extends to machined, threaded and slotted pipe
typically used for drilling and environmental monitoring applications. Modern
state of the art process machinery is used to provide a consistent quality product.
Perforated pipes with half or full perforations are also available and typically used
for sub surface drainage. Threading also provides an alternative joining solution
without the need for solvents.Being a fully integrated manufacturer with in house manufacturing capability enables
Plascorp to offer a broad product portfolio along with the opportunity to customise
products to meet its client’s specialised requirements.
lengths and formulations set Plascorp apart from other suppliers within the
Australian market.

KEY BENEFITS:
// Custom lengths from 1m to 6m
// Threading is available in sizes up to 315mm
// Slotting is available in sizes up to 500mm
// Wide selection of slot patterns and slot widths available.

DRILL CLAMPS & ELEVATORS

Plascorps™ Product offering to the
drilling industry extends to Clamps
and Elevators. These tools are used
worldwide by well drillers, pump
installers, well servicemen and
environmental drillers. With an
all steel construction, these tools
are designed to last.

KEY BENEFITS:
// Range of sizes available
// Solid construction
// Can be used with an a number of
different types of pipe.

DRILL KKLAMP

DRILL KKLAMP 1 – ADJUSTABLE 1”-2”
DRILL KKLAMP 2 – ADJUSTABLE 2.5”-4”
DRILL KKLAMP 3 – ADJUSTABLE 3”-6”

// Kwik Klamp allows workers to bring pipe joint
up to an easy working level
// Easy to operate, over center locking of jaws when
downward pressure is applied to lever handle
// Larger sizes have a 1/2” safety pin used to prevent
accidental unclamping
// Can be used with an array of pipe materials

CASING ELEVATORS

DRILL 4” PVC CASING ELEVATORS
DRILL 5” PVC CASING ELEVATORS

// Our PVC Elevators allow safe access to your PVC casing
// Safer than ropes, cables or loop chains
// 1/2” lock pin and hinges
// Fast and safe way to install bell end well casing

PVC FLUSH JOINT PIPE CLAMPS

DRILL 4” PVC JOINT PIPE CLAMP
DRILL 5” PVC JOINT PIPE CLAMP
DRILL 6” PVC JOINT PIPE CLAMP
DRILL 8” PVC JOINT PIPE CLAMP

// Our light weight and easy to handle Flush Joint Clamps for PVC pipe are developed for the environmental industry to hold PVC pipe safely
// Proper clamp tension must be applied in order to meet or possibly exceed the load capacity
// Load tested to over 2000 lbs. for sizes 3” – 6” PVC pipe
// Load tested to over 3000 lbs. for sizes 8”